- RS raktári szám:
- 901-3967P
- Gyártó cikkszáma:
- Si8920AC-IP
- Gyártó:
- Skyworks Solutions Inc
- RS raktári szám:
- 901-3967P
- Gyártó cikkszáma:
- Si8920AC-IP
- Gyártó:
- Skyworks Solutions Inc
Engedélyezés és megfelelőség
- Származási ország (Country of Origin):
- TH
Termékadatok
Si8920 Szigetelt Erősítő Az Áramáthidaláshoz
The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system.
Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range.
High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter.
To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor.
Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range.
High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter.
To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor.
A Si8920 4 változatban kapható:
SI8920AC-IP (RS 901-3967), ±100 mV bemeneti tartománnyal, DIP-8 típusú kétszárnyú csomagban
SI8920BC-IP (RS 901-3976), ±200 mV bemeneti tartománnyal, kétajtós DIP-8 csomagban
SI8920AD-IS (RS 901-3979), ±100 mV bemeneti tartománnyal, SOIC-16 kiszerelésben
SI8920BD-IS (RS 901-3973) egy SOIC-16-os csomag bemeneti tartománya ±200 mV
SI8920AC-IP (RS 901-3967), ±100 mV bemeneti tartománnyal, DIP-8 típusú kétszárnyú csomagban
SI8920BC-IP (RS 901-3976), ±200 mV bemeneti tartománnyal, kétajtós DIP-8 csomagban
SI8920AD-IS (RS 901-3979), ±100 mV bemeneti tartománnyal, SOIC-16 kiszerelésben
SI8920BD-IS (RS 901-3973) egy SOIC-16-os csomag bemeneti tartománya ±200 mV
Az áramerősség-érzékelő erősítők feszültségkimenete nagyon alacsony értékű ellenállás feszültségesésével arányos, általában nagy áramerősségű elosztóban. Így mérik az átfolyó áramot abban a befecskendezőszelepek elosztócsövében.
Jellemzők
Tulajdonság | Érték |
---|---|
Áramellátás típusa | Egyszeres |
Jellemző egyszeres tápfeszültség | 3 → 5,5 V |
Csatornák száma chipenként | 2 |
Kimenet típusa | Különbözeti |
Maximális tápáram | 5,5 mA |
Rögzítés típusa | Furatszerelt |
Csomag típusa | DIP |
Tüskék száma | 8 |
Méret | 9.9 x 6.6 x 3.44mm |
Magasság | 3.44mm |
Hossz | 9.9mm |
Maximális tápfeszültség | 5,5 V |
Szélesség | 6.6mm |
Maximális működési hőmérséklet | +125 °C |
Minimális tápfeszültség | 3 V |
Min. működési hőmérséklet | -40 °C |